If you have never had turf put in, the process can feel like a black box. It is not. Most crews follow the same order on every job. Here is a typical Lakewood install, step by step, so you know where the time and money go.
What does the crew do on artificial turf installation day?
The crew marks the area, pulls the grass and soil, caps sprinklers, then builds and compacts a crushed rock base. Next they lay the turf with all blades facing one way, join the seams, fasten the edges and brush in infill. A smaller yard may be done in a day. Larger ones take a few. Clear the yard, unlock the gates and sort out pets and parking beforehand, and the crew can work without delays you might end up paying for.
Morning One: Marking and Digging
On day one the installers go over the yard with you and outline the turf area using paint or flags. Sprinkler heads and pipes get located. Underground utilities should be flagged before this point. Next comes excavation: a sod cutter strips the lawn and a few inches of dirt are removed.
Sod and soil go into a trailer or dump truck. Sprinkler heads in the turf area get capped. The crew checks the grade so the finished turf sits at the right height beside patios and walks.
Building and Compacting the Base
Then the base. Crushed rock gets wheeled in and spread over the dug-out area. The crew rakes it smooth, shapes a slight slope for drainage and runs a plate compactor over it. They may repeat this in layers until the base is firm and even.
The base takes time, and it should. It is the wrong place to cut corners. A firm, well graded base keeps turf flat and drains water. Some crews add a weed barrier now, depending on the yard and product.
Laying Turf and Finishing
Rolls are spread over the base with every blade leaning the same way so the color stays consistent. Where rolls meet, the crew lines up the edges and joins them with seam tape and adhesive. Then the turf is trimmed along borders and fastened at the edges.
Last, infill is spread over the surface and worked into the fibers with a power broom. The broom also stands up the blades and hides the seams. The crew cleans up, hauls off leftovers and walks the finished yard with you.
Once the Crew Is Gone
Let the infill settle for a few days and brush any flat spots. Keep heavy furniture off new seams for a bit. If you are planning your own install, we can match you to an independent area turf provider who works in Lakewood.
